Laboratory Glassware, Laboratory Plasticware, Biological Models, Lab Equipment, Educational Instruments

Malleable steel body.

Size in mm a) 150 b) 200 c) 250 d) 300

Drop forged nickel chrome molybdenum steel wrench with one jaw adjustable by means of a square cut screw. Overall length 150mm. Maximum jaw opening 20mm.

Set of eight keys. Two patterns for A.F and metric screws.

A.F. 1/16, 5/64, 3/32, 1/9, 5/32, 7/32, inch

Clear, polythene, reseal able bags/pouches. Available in different sizes for storing stationary, sending samples etc. Opening on width, (Pack of 100)

Size (L x W) mm : 50 x 75, 75 x 100, 100 x 125, 100 x 150, 125 x 150

Suitable for universities, Research Laboratories and Pathological labs. Perforated short arm Brass/Gunmetal beam has the circular arrestment in the movement which does not permit the hangers and the pans to slide, saves imitation to re-installation. The compensating suspension contribute for its greater efficiency and durability, fitted with fine agates, the riders arrangement has been provided. Polished wooden/glass showcase with slide doors with counterpoise front door and fitted with levelling screws and plumb.

Specifications :
Capacity : 200g
Sensitivity : 0.1mg

Suitable for use of Students of High Schools and Chemists. Selected agates has been studded in the beam and hangers, Brass beam, removable Al-pans, rider arrangement, polished wooden/glass showcase with side doors with counter poise front door and fitted with levelling screws and plumb line.

Specifications :
Capacity : 200g
Sensitivity : 0.2mg

Body made of cast iron and two removable pans are die pressed, chrome plated.

Capacity (a) 2kg (b) 5kg (c) 10kg

It is also called platform balance and has a weighing capacity of 2 Kg supplied with supplementary masses. The balance has a diecast aluminium base beautifully painted, pressure die casted two beams, graduated 0-10 g x 0.1 g and 0-200 x 10 g, taring capacity 225 gm with tare beam. Spring loaded zero-adjust compensator. Two pans are of stainless steel each of dia 150 mm. Supplementary masses of metal are one each of 100 g, 200 g, 500 g and 1000 g. Magnetic damping is provided for quick weighing.

Accessory :
(a) Specific Gravity attachment consisting of a support rod fitted into a hole in the base and clamp able on edge of a bench or working table.

Based on E.M.F.C. Technology, LED display - Standard bidirectional RS 232C interface; selected baud rate - Easy operation with feather touch membrane keys - Automatic zero tracking - Port for external display - Stainless steel weighing pan - Multiple weighing units : Grams & Carat - Polyfunction : counting parts, "weighing, percentage weighing, accumulation of weights in memory - Taring Range (Subtractive) : Up to full capacity - Response time (Approx) : 5 to 8 secs - Power requirements : 230V AC + 10% -15%, 50 Hz - operation temperature range : 10c to 45c .

* The balance is supplied with Breeze shield as standard, for other models Breeze shield can be supplied on request.
* All Specifications are subject to change for improvement without notice.
* Higher ranges balances are also available.

Auto shut off, auto zero tracking, LCD display, battery & mains operated.

Note: Specifications/designs are subject to change.

Cap. 311g sensitivity 0.01g with four beams, each provided with non-removable slider and graduated beams 0 to 200g x 100g, 0 to 100g x 10g, 0 to 10g x 1g and 0 to 10mg respectively. With zero adjustment and stainless steel pan 90mm diameter with two pouring spouts and handle. Height of stirrup 175mm. Magnetically damped beam movement ensures rapid weighing. A platform housed in the base can be used for density measurements.

This is sliding mass single Pan Balance having die cast aluminium base, beautifully painted, 150 mm dia stainless steel pan, three notched weighing beams with center indicating calibrated sliders (sliding masses) to indicate weight at any point on the notched beams, magnetically damped beam for rapid weighing, spring loaded zero adjust compensator. Tare capacity 225 gm.

Beams with graduated scales 0-500 g x 100 g, 0-100 g x 10g, 0-10g x 0.1 g. Thus giving a total capacity of 610 gm.

Capacity is increased to 2610 gm by hanging supplementary masses (2 x 1000 g, 1 x 500 g) on the ends of beam. Supplied with dust cover.

Accessory :
(a) Specific gravity attachment with support rod which slides into the underside hole of the base and clamp able on edge of a bench for specific gravity measurement.

To show that the charge transferred to a conductor resides on the external surface of the conductor. Consist of pair of Brass hemisphere 50 mm diameter, fitted with insulating handles, hollow sphere with a hole in the centre mounted on a insulated stand.

For blood cell counting and simple computation, including percentage. Each unit counts upto 999 and last unit totalizes the different cells. With dual know at both ends to facilitate east resetting.

Models
a 5 Keys
b 8 Keys

Mouth, Nickle plated brass, with nipple.

Size (cm.) : 20cm, 30cm